1
Detect
AI watches your existing CCTV and phone cameras, describing possible hazards in plain language.
Patent pending · 3 provisional applications
See the hazard before it becomes the incident.
Turn the cameras you already have into real-time OSHA hazard detection, routed to the person who can fix it.
Book a pilot →Existing camerasUse what you already have.
Human-reviewed alertsReal people, real judgment.
Inspection-ready recordsBuilt for audits and compliance.
Patent pending · 3 provisional applications
Axis TIPP member
SAM.gov registered for federal workUEI SNYRVFRZMKY4 · CAGE 25H53
How it works
One closed loop. Detect, review, act, close, and learn.
A person reviews every AI suggestion before anything happens.
- 1 · DetectAI watches your existing CCTV and phone cameras, describing possible hazards in plain language.
- 2 · ReviewA competent person confirms or dismisses the alert before anything is sent.
- 3 · ActConfirmed findings are routed to the person who can fix them.
- 4 · CloseHazardLoop tracks mitigation through verified closeout and inspection-ready records.
- 5 · LearnWorkSafeStory turns the lesson into toolbox content, and verified findings sharpen the next watch.
2
Review & act
A competent person confirms or dismisses the alert, then routes it to the right person to fix.
3
Close out & learn
HazardLoop verifies the fix, while WorkSafeStory turns the lesson into toolbox content.
What we offer
One loop. Everything in its place.
Each capability sits at the stage it serves — from first detection through closeout, learning, and the people who run it.
Detect
WSafe CCTV
wsafe.si · WSafe AI on existing camerasAI hazard detection on the jobsite cameras you already have. No new hardware to install.
Explore WSafe CCTV →WSafe.ai Mobile
wsafe.aiWorker phone hazard capture and reporting, so the people closest to the work can flag what a camera might miss.
Explore WSafe.ai Mobile →WSafe Robotics
Coming soon · In developmentCovered in the CCTV provisionalExtending detection to robotic and autonomous inspection platforms, into the same human-reviewed queue. In development — not available today.
Learn about WSafe Robotics →EnviSafe
envisafe.aiEnvironmental conditions monitoring. A Detect-stage module that feeds the learning loop.
Explore EnviSafe →SafeForm
safeform.aiErgonomic analysis.
Explore SafeForm →Review
InductIQ
inductiq.aiInduction, training verification and incident reporting.
Explore InductIQ →Act & close
HazardLoop
hazardloop.comShared incident registration, communication, routing, and mitigation through to verified closeout.
Explore HazardLoop →WSafe Field Services
Launched October 2026Credentialed safety staffing, records setup, NFPA 70E training, and on-site support on top of the software.
See Field Services →Learn
WorkSafeStory
worksafestory.comSafety stories and lessons learned.
Explore WorkSafeStory →Start here
Founding Pilot
$1,000 · 30 days · no install feePut your existing cameras to work on a paid founding pilot.
See pilot details →Safety audits
$1,500 · WSafe Field ServicesA credentialed safety audit of your site, with a path to records setup and ongoing support.
See audit details →The recursive learning brain
Every verified finding makes the next watch smarter.
Competent-person-verified hazards feed heatmapped tracking and probability-based prioritization. That helps EHS and risk teams focus on the likeliest hazards before injury or property damage.
Verified first
Only findings a competent person has confirmed enter the learning record. AI suggests. People decide.
Heatmapped tracking
Approved records show where hazards cluster across the site, so patterns do not stay buried in separate reports.
Probability-based priority
The system is designed to help teams look first at the hazards most likely to appear next.
Recognize safe behavior, not only hazards.
A patent-pending part of the system is built to reinforce the work that is being done right — so good practice gets seen, not just the things that go wrong.
HazardLoop is the shared platform for incident registration, communication, routing, and mitigation through to closure. The recursive learning brain behind heatmaps and probability-based priority is hazloop.si. Earlier detection and verified closeout are meant to help sites avoid the cost of incidents. That is an intended benefit, not a proven savings figure.
For risk management
Built for the teams who own the risk.
WorkSafeAgent is built for general-contractor risk management and risk-mitigation teams — the people who own the rollout. Safety teams are engaged after initiation, through installation, training, management, follow-up, and continuous learning.
Risk teams lead
Risk management and risk-mitigation departments initiate the program and own the standard from the start.
Safety teams run the loop
After initiation, safety teams take it through installation, training, management, follow-up, and recursive learning.
WSafe Field Services · Launched October 2026
A credentialed safety person on top of the software.
Software flags the work. A credentialed safety professional evaluates your site, sets up your records, and maintains them so you stay inspection-ready.
Book a $1,500 safety audit →A practical layer of support
- Credentialed safety staffing
- Safety audits — $1,500
- Evaluate OSHA and environmental records
- Set up documentation as part of onboarding
- Maintain records with a plan that fits your site
- NFPA 70E electrical safety training
Built around what you use
Works with the cameras and tools you already have.
Existing CCTV
Start with cameras already on your site, plus phone cameras where needed.
Axis
WorkSafeAgent is an Axis TIPP member.
Genetec
Genetec integration is in development (Genetec DAP).
Procore
Procore is coming soon.
UT Arlington iSET Lab
Research collaboration on AI video and synthetic training data.
Published research
Research archived on Zenodo.
Technical research is archived on Zenodo (DOI 10.5281/zenodo.20499515). It models a projected 59.4% reduction in total annual safety-related costs for a modeled 500-person employer.
That figure is a research projection, not customer results. The report is self-published and has not been independently reviewed; a journal submission is planned.
Powering Workplace Safety Through Artificial Intelligence
A Multi-Modal AI Framework for OSHA Compliance, Hazard Detection, Ergonomic Analysis, and Predictive Incident Prevention
- Published
- June 2, 2026
- Repository
- Zenodo
- DOI
- 10.5281/zenodo.20499515
The founder
Field-built in Abilene.
Sean Rawlins is the founder of WorkSafeAgent. He is a U.S. Coast Guard veteran and field safety professional, based in Abilene, Texas.
U.S. Coast Guard veteranField safety professionalAdvisor, TSTC OSEC labFounding president, ASSP student section at TSTC AbileneAbilene, Texas
Connect on LinkedIn →Traction
Early support from the field
Letters of support from two data-center contractors: Marshall Sharp (Sharp Construction Services) and Tindol Construction.
Insights
Notes from the field.
Start with a founding paid pilot
Put your existing cameras to work.
$1,000 Founding Pilot. 30 days. No install fee.
Field Services safety audits are $1,500.
Contact
Book a pilot or ask a question.
Every message reaches the founder directly.